> For the complete documentation index, see [llms.txt](https://guide.strikepack.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guide.strikepack.com/dominator_eliminator_newexperience/strikepack-dominator-for-xbox/mapping-mode.md).
# Mapping Mode
For Xbox Series X|S® / Xbox One® / PC / Switch™
**New Experience** - Firmware v3 Guide
{% hint style="success" icon="gamepad-modern" %}
**NOTE:** Paddle Buttons is a universal term for STRIKEPACK™ Dominator Paddles and STRIKEPACK™ Eliminator Action Buttons.
{% endhint %}
Mapping Mode
> CM00133 (Universal) / CM00118 / CM00040-1 / CM00040 / CM00023-1 / CM00023
>
> ***
>
> Xbox Series X|S® / Xbox One® / PC / Switch™
As of the Firmware v3, **Paddle Mapping** for the STRIKEPACK™ Dominator for Xbox® has been reworked to be similar to more recent products like STRIKEPACK HORIZON™. Direct Mapping has been replaced with a dedicated **Mapping Mode** that helps to prevent accidental remapping. This dedicated mode is entered exclusively through the **left-hand unlabeled button**:
***
{% hint style="danger" icon="power-off" %}
**NOTE:** The right-hand unlabeled button has been repurposed into a [**Restart**](/dominator_eliminator_newexperience/strikepack-dominator-for-xbox/restart-strikepack.md) button.
{% endhint %}
***
Unlike Horizon (which can have near unlimited configurations), Paddle mappings here are a single configuration shared between **Tournament Mode** & **New Experience M.O.D. Mode**, just as they were before. Since different games often use different control schemes, you may want to remap the Paddles when switching games.
Check out the quick demonstration of Mapping Mode below, or follow the steps on this page for more detailed instructions:
{% stepper %}
{% step %}
Enter Mapping Mode
You can enter **Mapping Mode** from **Tournament Mode** or **New Experience M.O.D. Mode**; it doesn't matter because it's the same mapping across both.
Hold Mapping Mode Button 300ms+
To enter the **Mapping Mode**, **hold** the **Mapping Mode** button (left-hand unlabeled button) for **300ms+**.
While in Mapping Mode, all 8 LEDs light up dimly.
When exiting Mapping Mode, all 8 LEDs blink brightly.
**NOTE:** To exit Mapping Mode at any point, **tap** either one of the unlabeled buttons.
{% endstep %}
{% step %}
Map to a Paddle
When in **Mapping Mode**, while **holding** the desired **Controller Button**, **tap** the desired **Paddle** to map to it. The right-hand **4 Green LEDs** will blink brightly to confirm the button has been successfully mapped.
{% hint style="danger" icon="gamepad-modern" %}
**NOTE:** You can **hold** multiple **Controller Buttons** simultaneously to be mapped to a single Paddle, but be aware that this is incompatible with Paddle Button M.O.D.s that use the Paddle mapping. See the example of 2 buttons being mapped below:
{% endhint %}
{% endstep %}
{% step %}
Clear a Paddle
When in **Mapping Mode**, to **clear** the desired **Paddle** of any button mappings, make sure you are *not* touching any buttons, then **tap** the **Paddle**. The left-hand **4 White LEDs** will blink brightly to confirm the Paddle has been successfully cleared.
{% endstep %}
{% step %}
Save & Exit Mapping Mode
To save & exit Mapping Mode, **press & release** either one of the unlabeled buttons. All **8 LEDs** will blink brightly as you're exiting Mapping Mode.
Save & Exit:Tap Mapping Mode Button
{% endstep %}
{% endstepper %}
## Next
Now that you've mapped your Paddles, most pages past this point cover optional M.O.D. (Macro On Demand) use. Next, we'll show you how to navigate the Config Menu, so you can start using M.O.D.s:
[**Menu: Category Navigation**](/dominator_eliminator_newexperience/strikepack-dominator-for-xbox/menu-category-navigation.md)
{% hint style="danger" icon="forward" %}
If you're *not* a M.O.D. user (only interested in Tournament Mode), [**skip the M.O.D. pages here**](/dominator_eliminator_newexperience/strikepack-dominator-for-xbox/memory-clear.md).
{% endhint %}
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.
Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:
```
GET https://guide.strikepack.com/dominator_eliminator_newexperience/strikepack-dominator-for-xbox/mapping-mode.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
Hold Mapping Mode Button 300ms+
**tap** either one of the unlabeled buttons.
