# Restart STRIKEPACK™

**New Experience** - Firmware 3.0 Guide

<div align="left"><figure><picture><source srcset="/files/KMLHC7VxHkSD3JV84GMk" media="(prefers-color-scheme: dark)"><img src="/files/VIB6xyHOuqTFRVg5JCq4" alt="" width="188"></picture><figcaption></figcaption></figure></div>

<figure><img src="/files/Dp2YQmCWJBPZKQpmFMyh" alt=""><figcaption></figcaption></figure>

<h2 align="center">Restart STRIKEPACK™</h2>

<figure><img src="/files/8WpTrC8AXmmcjL03Z9Zz" alt=""><figcaption></figcaption></figure>

> <mark style="color:$info;">CM00136 (Universal) / CM00119 / CM00034</mark>
>
> ***
>
> <mark style="color:$info;">Xbox Series X|S® / Xbox One® / PC / Switch™</mark>

As of Firmware 3.0, you can restart the STRIKEPACK™ Eliminator for Xbox® without unplugging it & plugging it back in. This feature forces reauthentication with your console, so it can be especially helpful if you typically leave your STRIKEPACK™-enabled controller plugged in.

<figure><img src="/files/ZHu4hcBYqNciUSIIg4N9" alt=""><figcaption></figcaption></figure>

{% stepper %}
{% step %} <img src="/files/WKxGM5nEvfMbZOqHLzmA" alt="" data-size="line"><mark style="color:$danger;">**Hold**</mark> the **Restart** button (top-right-hand unlabeled button) for <mark style="color:$danger;">**500ms+**</mark>. When your controller turns off, release the Restart button.
{% endstep %}

{% step %}
Wait a moment until the Gearhead Eyes cycle, and the STRIKEPACK™ Eliminator restarts into **Tournament Mode**.
{% endstep %}

{% step %} <img src="/files/WKxGM5nEvfMbZOqHLzmA" alt="" data-size="line"><mark style="color:$danger;">**Hold**</mark> the <img src="/files/S62hVIAQ7xHSFUFPYR6S" alt="" data-size="line"> **Home&#x20;**<mark style="color:$info;">**(Xbox®)**</mark> button until your controller turns back on.
{% endstep %}

{% step %}
You're good to go. Happy gaming!
{% endstep %}
{% endstepper %}

{% hint style="success" icon="desktop" %}
Playing on PC with the STRIKEPACK™ Eliminator? Easily switch to Update / Configuration Mode to use Web M.O.D. Central: While <img src="/files/WKxGM5nEvfMbZOqHLzmA" alt="" data-size="line"><mark style="color:$danger;">**holding**</mark>**&#x20;Action Buttons 1** & **3&#x20;**<mark style="color:$danger;">**together**</mark>, <img src="/files/WKxGM5nEvfMbZOqHLzmA" alt="" data-size="line"><mark style="color:$danger;">**hold**</mark> the **Restart** button (top-right-hand unlabeled button) for <mark style="color:$danger;">**500ms+**</mark> until your controller turns off, then release the Restart button. When "Strike Pack Eliminator" shows up in Web M.O.D. Central, release the Action Buttons.

<p align="center"><img src="/files/eJkRlpI9KeYjMJvsLGKx" alt=""></p>
{% endhint %}

<figure><img src="/files/8WpTrC8AXmmcjL03Z9Zz" alt=""><figcaption></figcaption></figure>

## Next

<figure><img src="/files/8WpTrC8AXmmcjL03Z9Zz" alt=""><figcaption></figcaption></figure>

[**Switch™ 1 & 2 Mode**](/dominator_eliminator_newexperience/strikepack-eliminator-for-xbox/switch-1-2-mode.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://guide.strikepack.com/dominator_eliminator_newexperience/strikepack-eliminator-for-xbox/restart-strikepack.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.