> For the complete documentation index, see [llms.txt](https://guide.strikepack.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guide.strikepack.com/dominator_eliminator_newexperience/strikepack-eliminator-for-xbox/switch-1-2-mode.md).
# Switch™ 1 & 2 Mode
For Xbox Series X|S® / Xbox One® / PC / Switch™
**New Experience** - Firmware 3.0 Guide
Switch™ 1 & 2 Mode
> CM00136 (Universal) / CM00119 / CM00034
>
> ***
>
> Switch™ 1 & 2 Mode
As of Firmware v3, you can use your **wired** STRIKEPACK™ Eliminator-enabled Xbox® controller with your **Switch™** or **Switch 2™** console!
* Fully supported; both in **Tournament Mode** & **New Experience M.O.D. Mode**.
* **Map** the **Action Buttons** in **Mapping Mode**.
* Use **any** included **M.O.D.s** (**M**acros **O**n **D**emand), including features like **Macro Editor**.
* Stick inputs have been optimized for smooth controls.
* Works in Switch™ 1 or 2 games that support the Switch™ Pro controller.
* 3.5mm headset audio through your Xbox® controller.
* There are limitations of course, like an Xbox® controller doesn't have HD Rumble or Motion Control.
{% stepper %}
{% step %}
To use the Strikepack Eliminator in **Switch™ 1 & 2 Mode**, you must first go to your Switch™ 1 or 2 console's **System Settings**, then make sure **Controller and Sensors > Pro Controller Wired Communication** is set to **On**.
{% endstep %}
{% step %} **Hold**** Action Buttons 1** & **3 ****together** while connecting the cable to your Switch™ 1 or 2 console or dock.
{% endstep %}
{% step %}
You should now be able to control your Switch™ 1 or 2 console with your STRIKEPACK™-enabled Xbox® controller.
{% endstep %}
{% step %}
Alternatively, if the Strikepack is plugged in already, you can restart it for Switch™ 1 & 2 Mode use without re-plugging. See below:
1. While **holding** **Action Buttons 1** & **3 ****together**, **hold** the **Restart** button (top-right-hand unlabeled button) for **500ms+**. When your controller turns off, release the Restart button.
2. Wait a moment until the Gearhead Eyes cycle, and the STRIKEPACK™ Eliminator restarts into **Tournament Mode**, then release the Action Buttons.
3. **Hold** the **Home ****(Xbox®)** button until your controller turns back on.
4. You should now be able to control your Switch™ 1 or 2 console with your STRIKEPACK™-enabled Xbox® controller.
5. If desired, **press & release** the **top 2 unlabeled buttons simultaneously** to switch to **M.O.D. Mode**.
6. If you experience any noticeable drift, you can use your console's **Controller and Sensors > Calibrate Control Sticks** feature. Happy gaming!
{% endstep %}
{% endstepper %}
---
# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.
## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.
Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:
```
GET https://guide.strikepack.com/dominator_eliminator_newexperience/strikepack-eliminator-for-xbox/switch-1-2-mode.md?ask=&goal=
```
`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
**Hold**** Action Buttons 1** & **3 ****together** while connecting the cable to your Switch™ 1 or 2 console or dock.
{% endstep %}
{% step %}
You should now be able to control your Switch™ 1 or 2 console with your STRIKEPACK™-enabled Xbox® controller.
{% endstep %}
{% step %}
Alternatively, if the Strikepack is plugged in already, you can restart it for Switch™ 1 & 2 Mode use without re-plugging. See below:
**Home ****(Xbox®)** button until your controller turns back on.
4. You should now be able to control your Switch™ 1 or 2 console with your STRIKEPACK™-enabled Xbox® controller.
5. If desired, 
**press & release** the **top 2 unlabeled buttons simultaneously** to switch to **M.O.D. Mode**.
6. If you experience any noticeable drift, you can use your console's **Controller and Sensors > Calibrate Control Sticks** feature. Happy gaming!
{% endstep %}
{% endstepper %}