# Mapping ## Mapping

{% hint style="info" %} "**Paddle Button**" is a universal term for Paddle or Action/Back Button. STRIKEPACK HORIZON™ features 4 numbered Paddles:

{% endhint %}

###

Paddle Button Mapping

{% hint style="success" %} STRIKEPACK HORIZON™ features per GAMEPACK Profile Paddle Button Mapping: {% endhint %}

Instructions	Image
Tap the Mapping icon, located on the bottom-bar, to either open or close the "Paddle Button Mapping" section.

This features **Controller Button to Paddle Button Mapping**:

Instructions	Image
Tap the Paddle Button that you have assigned to Mapped Buttons.

It will be singled out as highlighted & selected, with **16** mappable controller buttons on display for you to swipe through.

Instructions	Image
To map to the Paddle Button, tap a button icon to highlight & map it.

You can map up to **4** controller buttons to be simultaneously pressed, **per** Paddle Button:

Instructions	Image
To unmap from the Paddle Button, tap a highlighted button icon to unmap it, or tap Clear ALL Mapped Buttons to clear the Paddle Button.

Instructions

Image

To unmap from the Paddle Button, tap a highlighted button icon to unmap it, or tap Clear ALL Mapped Buttons to clear the Paddle Button.

{% hint style="info" %} Remember that tapping the

**Mapping** icon again will close the section. {% endhint %}

### Hardware Mapping

It is possible to map Paddle Buttons on the **STRIKEPACK HORIZON**™ controller adapter without reaching for the app. The video below shows this process for both **Tournament Mapping** & **GAMEPACK Mapping**: ### Mapping Video {% embed url="" %}

***HOLD*** either **one** of the ***MAPPING*** buttons on the **STRIKEPACK HORIZON**™ until the Gearhead Eyes & both RGB LEDs turn a shade of **PURPLE**. You can now ***RELEASE*** the Mapping Mode button. * ***If you are in a GAMEPACK profile**,* "**Paddle Button Mapping**" will have automatically popped up on the app to provide visual indication. 2. You can

***HOLD 1**-**4*** controller buttons **together** to be mapped to a Paddle Button. While you are

***HOLDING*** the controller button(s) that you wish to map,

***TAP*** the ***PADDLE BUTTON*** that you want to map to. A successful mapping assignment will flash **GREEN**. 3. To unmap (**clear**) a Paddle Button, while **NO** controller buttons are held,

***TAP*** the ***PADDLE BUTTON*** that you want to clear. A successful unmapping will flash **RED**. 4. Repeat **STEP 2** for each Paddle Button that you want to map controller buttons to. 5. To **exit** Mapping Mode,

**TAP** either **one** of the ***MAPPING*** buttons. * ***If you are in a GAMEPACK profile**,* this will close "**Paddle Button Mapping**".

## Controller

And that covers "**Mapping**". "[**Controller**](https://guide.strikepack.com/horizon/manuals/baseball/gamepacksetup/controller)" will be covered next...